Fakultät für Architektur und Bauingenieurwesen

Veröffentlichungen

2021 - 2023

Hoffman, C.; Geissler, A.; Anders, S.: In-situ U-Wert-Messung - Teil 2: Vergleich von Messgeräten und Anwendung vor Ort, Bauphysik, Ernst&Sohn, doi.org/10.1002/bapi.202200037, Februar 2023

Anders, S.; Iravani, A.; Hoffmann, C.; Geissler, A.; Voss, K.: In-situ U-Wert-Messung - Teil 1: Vergleich von Verfahren und Einflüsse in Heizkammerversuchen, Bauphysik, Ernst&Sohn, doi.org/10.1002/bapi.202200041, Februar 2023

Gebuhr, G.; Pise, M.; Anders, S.; Brands, D.; Schröder, S.: Damage development of steel fibre reinforced high performance concrete in high cycle fatigue tests, Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022) Cape Town, South Africa, DOI: 10.1201/9781003348450-216, 5-7 September 2022

Pise, M.; Brands, D.; Schröder, J.; Gebuhr; G.; Anders, S.: Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete, Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems - Zigoni (ed.), DOI: 10.1201/9781003348443-212, September 2022

Schröder, J.; Pise, M.; Brands, D.; Gebuhr; G.; Anders, S.: Phase-field modeling for damage in high performance concrete at low cycle fatigue, Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems - Zigoni (ed.), DOI: 10.1201/9781003348443-211, September 2022

Schröder, J.; Pise, M.; Brands, D.; Gebuhr; G.; Anders, S.: Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: Numerical calibration and experimental validation, Computer Methods in Applied Mechanics and Engineering (doi.org/10.1016/j.cma.2022.115181), August

Markert, M.; Gebuhr, G.: Influence of Concrete Moisture on the Pull-Out Resistance of Steel Fibres, Proceedings of the 5th International Conference Bond in Concrete 2022, DOI: dx.doi.org/10.18419/opus-12271, Stuttgart, Germany, 25.-27. Juli 2022

Gurski, J.F.; Anders, S.; Zwolinski, S.: Properties of recycled aggregates for precast industry produced in different crushers. Proceedings of the “fib Congress 2022”, Oslo, 12.-16.06.2022

Gebuhr, G.; Pise, M.; Anders, S.; Brands, D.; Schröder, J.;: Damage Evolution of Steel Fibre-Reinforced High-Performance Concrete in Low-Cycle Flexural Fatigue: Numerical Modeling and Experimental Validation, Materials 2022, 15(3) (doi.org/10.3390/ma/15031179), Februar 2022

Kern, B.; Oneschko, N.; Podhajecky, A.-L.; Lohaus, L.; Anders, S.; Haist, M.: Comparative analysis of concrete behaviour under compressive creep and cyclic loading; International Jourmal of Fatigue (doi.org/10.1016/j.ijfatigue.2021.106409), Dezember 2021

Pise, M.; Brands, D.; Schröder, J.; Gebuhr, G.; Anders, S.: Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations, Proceedings in Applied Mathematics and Mechanics (DOI:10.1002/pamm.202100180), Juni 2021

Iravani, A.; Feldrappe, V.; Ehrenberg, A.; Anders, S.: Stability of Concrete containing Blast-Furnace Slag exposed to cyclic elevated temperature, Symposium fib ICCS20-21, Prag, 2021

Feldrappe, V.; Ehrenberg, A.; Iravani, A.; Anders, S.: Der Einfluss von Hüttensand und Hochofenstückschlacke auf die Temperaturbeständigkeit von Beton unter zyklischer Hochtemperaturbeanspruchung, Vortrag/Poster, ibausil-Tagung, Bauhaus-Universität Weimar, 2021

Weber, F.; Anders, S.: Vergleich von 3-Punkt und 4-Punkt Biegezugversuchen zur Bestimmung der Nachrissbiegezugfestigkeit, Beton- und Stahlbetonbau 116, Sonderheft Stahlbetonbau, p. 48-58, Ernst&Sohn Verlag, Berlin (DOI: 10.1002/best.202100013), 2021

Weber, F.; Orben, J.; Haus, A., Anders, S.: Betontechnologische Einflüsse auf die Leistungsklassen von Stahlfaserbeton, Beton- und Stahlbetonbau 116 (2021), Sonderheft Stahlbetonbau, p. 36-47, Ernst&Sohn Verlag, Berlin (DOI: 10.1002/best.202100011), 2021

2016 - 2020

Pise, M.; Brands, D.;  Schröder, J.;  Gebuhr, G.; Anders, S.: On the application of representative volume elements for steel fiber reinforced high performance concrete - a numerical study, Proceedings in Applied Mathematics and Mechanics (DOI: 10.1002/pamm.202000323), Juli 2020

Breitenbücher, R.; Anders, S., von Daake, H.; Wiens, U.: 2. Überarbeitung der Vergussbeton-Richtlinie des DAfStb, p. 2-3, beton [12/2020], Verlag Bau+Technik, Erkrath, 2020

Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Elasto-plastic phase-field model for pullout tests of steel fiber embeddeding high-performance concrete: numerical calibration and experimental validation, Proceedings in Applied Mathematics and Mechanics. Vol. 19(1), DOI:10.1002/pamm.201900255, 2019

Gudžulić, V.; Neu, E.; Gebuhr, G.; Anders, S.; Meschke, G.: Numerisches Mehrebenen-Modell für Stahlfaserbeton: Von der Faser- zur Strukturebene - Mehrstufige Validierung anhand einer experimentellen Studie an hochfestem Faserbeton, Beton- und Stahlbetonbau, VOl. 115(2), DOI: 10.1002/best.201900067, 2019

Gebuhr, G.; Pise, M.; Sarhil, M.; Anders, S.; Brands, D.; Schröder, J.: Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models, Structural Concrete, Volume 20(4), pp. 1254-1264, DOI: 10.1002/suco.201900034, 2019

Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete, Proceedings of the Seventh International Conference on Structural Engineering, Mechanics and Computation SSEMC), pp. 1391-1396, DOI: 10.1201/9780429426506-240, 2019

Gebuhr, G.; Pise, M.; Sarhil, M.; Anders, S.; Brands, D.; Schröder, J.: Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue, Proceedings of the Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC), DOI:10.1201/9780429426506-249, 2019

Gebuhr, G.; Pise, M.; Sarhil, M.; Anders, S.; Brands, D.; Schröder, J.: Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling, Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, pp. 889-896 (full paper digital), 27.-29.05.2019 in Kraków (Polen), 2019

Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Phase-field modeling of steel fiber reinforced high-performance concrete considering failure, VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Braunschweig, 2019

Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation, Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Wien, (DOI: 10.1002/pamm.201900255), 2019

Pouran, O.; Anders, S.; Harte, R.; Montag, U.: Influence of Variation in Strength of Concrete on the Bending Response of a Cut-and-cover-Tunnel Structure Considering Results of Small-scale Tests at Elevated Temperatures, Application of Structural Fire Engineering (ASFE’19), June 13-14, Singapore, 2019

Kesting, H.; Helmus, M.; Anders, S.: Building Information Modeling (BIM) zur Optimierung von Stoffkreisläufen im Bauwesen. Artikel im „Recycling Atlas“ Edition Detail, München 2018

Pise, M.; Brands, D.; Gebuhr, G.; Schröder, J.; Anders, S.: Analysis of pullout behavior of steel fibres embedded in high-performance Concrete using phase-field modeling. International Association of Applied Mathematics and Mechanics, Munich 19.-23. March 2018

Anders, S.: Testing for model-specific deterioration indicators – Versuche für modelspezifische Schädigungsindikatoren. 2. Kolloquium – GRK 2075 „Modelle für die Beschreibung der Zustandsänderung bei Alterung von Baustoffen und Tragwerken“. Eingeladener Vortrag, Braunschweig, 05./06.Oktober 2017

Iravani, A.; Anders, S.: Explosive spalling of UHPC - Evaluating spalling risk by mass loss measurement at high temperatures. Proceedings of the 5th International Workshop on Concrete Spalling (IWCS), 12./13. October 2017, Borås, Sweden

Iravani, A.; Anders, S.: Effect of cement type, aggregate type and concrete age on the mass loss of concrete exposed to elevated temperature. Proceedings of the 5th International Workshop on Concrete Spalling (IWCS), 12./13. October 2017, Borås, Sweden

Kesting, H.; Anders, S.; Helmus, M.; Meins-Becker, A.: Building Information Modeling (BIM) als Basis für den Umgang mit digitalen Informationen zur Optimierung von Stoffkreisläufen im Bauwesen. 58. Forschungskolloquium des DAfStb, 20./21.09.2017, Kaiserlautern

Anders, S.; Schovenberg, M.: Performance of Steel Fibre Reinforced Concrete – Comparability of Tests according to DAfStb-Guideline “Stahlfaserbeton” and DIN EN 14651. Acta Polytechnica CTU Proceedings, p. 68-70; Prague 2017

Anders, S.; Iravani, A.: Explosive Spalling of UHPC – Evaluating Spalling Risk by mass loss measurements at high temperatures. Vortrag im Rahmen des “Sino-German Science Workshop on UHPC” and “1st International Conference on UHPC Materials an Structures”, 27.-30.10.16 Changsha, China

Iravani, A.; Anders, S.: Time dependent Mass Loss of UHPC after single and cyclic thermal Exposure. Proceedings of HiPerMat 2016, 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, March 9-11, 2016, Kassel

Iravani, A.; Anders, S.: Thermal Exposure of UHPC – Time dependent Mass Loss of UHPC after Single and Cyclic Thermal Exposure. 4th International Symposium on Ultra-High Performance Concrete Nanotechnology for High Performance Construction Materials”, Kassel 2016

 

2011 - 2015

Anders, S.: Residual Strength of Steel-Fiber reinforced Concrete after High-Temperature Exposure. Proceedings of the 4th International Workshop on Concrete Spalling due to Fire Exposure (IWCS), 08./09. October 2015, Leipzig

Iravani, A.; Saravanja, M.; Anders, S.: Mass Loss and Porosity Development of various Concrete Mixtures at High-Temperatures. Proceedings of the 4th International Workshop on Concrete Spalling due to Fire Exposure (IWCS), 08./09. October 2015, Leipzig

Anders, S.: Comparison of Residual Strengths of Concretes with quarzitic, limestone and slag sand constituents after cyclic high-temperature exposure. Beitrag zur ICCRRR – International Conference on Concrete Repair, Rehabilitation and Retrofitting, Leipzig, 05-07 October 2015

Anders, S.: Feuchtemessung im Bauwesen. Vortrag im Rahmen des b.v.s Seminars Messtechnik für Bauingenieure organisiert an der BUW.

Saravanja, M.; Anders, S.: Effects of Superabsorbent Polymers on the Behaviour of UHPC subjected to High Temperatures. In Proceedings of the International RILEM Conference on “Application of Superabsorbent Polymers and other New Admixtures in Concrete Construction”, 14th – 17th September 2014, Dresden, RILEM Publications S.a.r.l., pages 257-264, Bagneux, 2014

Anders, S.: Concrete at High Temperature – Tests for Validating Numerical Models. Proceedings of the XIVth Bilateral Czech/German Symposium, 4th to 7th June 2014, Wuppertal

Núñez Aldave, J. K.; Anders, S.: Fatigue Behaviour of High-Performance Concrete – Comparison of Damage Indicators for Numerical Modelling. Proceedings of the XIVth Bilateral Czech/German Symposium, 4th to 7th June 2014, Wuppertal

Anders, S.: Hochfeste Betone unter Ermüdungsbeanspruchung – Einfluss der Temperaturentwicklung bei hohen Lastfrequenzen. Beitrag zur Festschrift zum 60. Geburtstag von Prof. Ludger Lohaus, Hannover, 2014

Anders, S.: Gestalten mit Beton – Beispiele und Möglichkeiten. Vortrag für Künstler aus dem Bergischen Land organisiert an der BUW.

Núñez Aldave, J. K.; Anders, S.: Ermüdungsverhalten von Hochleistungsbeton – Vergleich von Schädigungsindikatoren. Beiträge zur 1. Jahrestagung des Deutschen Ausschuss für Stahlbeton mit 54. Forschungskolloquium. 07./08. November 2013, Ruhr-Universität Bochum

Lohaus, L.; Petersen, L.; Griese, R.; Anders, S.: Spezialbetone im Kraftwerksbau, Zeitschrift BauPortal, Heft 3, März 2012

Anders, S.: Design of Grouted Connections for Offshore Wind Energy Converters and Composite Structures using UHPC. In Proceedings of the “3rd International Symposium on Ultra-High Performance Concrete Nanotechnology for High Performance Construction Materials”, 07.-09.03.2012, Kassel

Saravanja, M.; Anders, S.; Klingsch, W.: Wirkung unterschiedlicher Fasern und Fasergehalte auf das Verhalten ultrahochfester Betone bei hohen Temperaturen. Festschrift zum 60. Geburtstag von Prof. Budelmann, 2012

Anders, S.: Hochleistungs-Vergusssysteme für Windkraftanlagen. Dyckerhoff-Baustofftechniktag Nordwest, Münster, 03.11.2011

Saravanja, M.; Klingsch, W.; Anders, S.: Effects of different Fibre Materials and Quantities on High Temperature Strength and Explosive Spalling of UHPC. Proceedings of the 2nd International RILEM Workshop on Concrete Spalling due to Fire Exposure, 05-07.10.2011, Delft

Anders, S.: Rohr-in-Rohr-Verbindungen – Modell zur Abschätzung der Beanspruchungen. Festschrift zum 60. Geburtstag von Gerhard Hanswille, Schriftenreihe des Institutes für Konstruktiven Ingenieurbau, Heft 20, 2011

Anders, S.: Erneuerbare Energien – Herausforderungen für die Baustofftechnik. In „Fortschritte in der Baustofftechnik“, Berichte aus dem Institut für Baustoffe, LUH, Hannover, 2011

Lohaus, L.; Petersen, L.; Anders, S.; Griese, R.: Beton im Kraftwerksbau. In: BetonKalender 2011, S. 433-517, Ernst&Sohn Verlag, Berlin, 2011

 

 

 

 

2006 - 2010

Anders, S.; Erhardt, T.: Offshore Windenergie – Neue Chancen für die Bautechnik in Beton. In: beton, S. 488-495, Verlag Bau-Technik, Erkrath, 12/2010

Anders, S.; Erhardt, T.: Offshore Windenergie – Neue Chancen für die Bautechnik in Beton. Fachtagung des Verbandes deutscher Betoningenieure, Dresden 2010

Anders, S.; Lohaus, L.; Lindschulte, N.: Opportunities and Risks of Steel Fibres in Grouted Joints. European Wind Energy Conference EWEC 2010, 20.-23. April 2010, Warsaw

Lindschulte, N.; Anders, S.: Grouted Joints – Trag- und Verformungsverhalten. Offshore-Windenergie-Kolloquium 2009, Hannover, 2009

Anders, S.; Lohaus, L.: Optimized High-Performance Concrete in Grouted Connections. In: Proceedings of the International fib Symposium 2008 – Tailor Made Concrete Structures – New Solutions for our Society, 19.-22.05.2008, Amsterdam

Anders, S.; Lohaus, L.: Ultra-High Performance Concrete in Grouted Connections - Potential and Design Aspects. In: Proceedings of the 2nd International Symposium on Ultra-High Performance Concrete, 05.-07.03.2008, Kassel

Anders, S.: Betontechnologische Einflüsse auf das Tragverhalten von Grouted Joints. Dissertation, Leibniz Universität Hannover, Institut für Baustoffe, 2008

Lohaus, L.; Anders, S.: Hybride Bauweisen mit Hochleistungsbeton – Neue Chancen aus der Forschung an Grouted Joints. 52. Ulmer Betontage, 12.-14.02.2008, Neu-Ulm

Lohaus, L.; Anders, S.; Wefer, M.: High-Cycle Fatigue of Ultra-High Performance Concrete (UHPC) - Fatigue Strength and Damage Development. In: Proceeding of the 3rd Int. Conference on Lifetime Oriented Design Concepts, 12.-14.11.2007, Bochum

Lohaus, L.; Anders, S.: Static and Fatigue Behaviour of Grouted Connections for Hybrid Structures. 2nd Symposium on Connections between Steel and Concrete, 4.-7.09.2007, Stuttgart

Lohaus, L.; Ramge, P.; Höveling, H.; Anders, S.: Superplasticizer-Based Approach for Optimized Paste-Composition and Robustness of SCC. Proceedings of the 5th International Symposium SCC2007, 03.-05.September 2007, Gent

Lohaus, L.; Anders, S.: Ductility and Fatigue Behaviour of Polymer-Modified and Fibre-Reinforced High-Performance Concrete. “Advances in Concrete Materials-Symposium 2007, 23./24.07.2007, Stuttgart

Anders, S.; Lohaus, L.: Polymer- und fasermodifizierte Hochleistungsbetone für hochdynamisch beanspruchte Verbindungen wie „Grouted Joints“ bei Windenergieanlagen. Schlussbericht zum Forschungsstipendium T 4/2002, Stiftung Industrieforschung Köln, April 2007, Hannover

Anders, S.; Lohaus, L.: Untersuchungen zum Ermüdungsverhalten axial beanspruchter Grouted Joints. Gigawind-Symposium 2007, 18.04.2007, Hannover

Anders, S.: Untersuchungen zum Ermüdungsverhalten axial beanspruchter Grouted Joints. Doktorandentreffen der deutschen Sektion der „European Academy of Wind Energy“, 22./23.03.2007, Hannover

Lohaus, L.; Anders, S.: Chancen kunststoffmodifizierter und faserverstärkter Hochleistungsbetone in neuen Bauweisen. Festschrift „Baustoffe für zukünftige Bauaufgaben“ Schriftenreihe des Instituts für Baustoffe, TU Dresden, 2006

Höveling, H.; Lohaus, L.; Anders, S.: Der Fließmittelbasierte Ansatz zur Optimierung von Hoch¬leistungs¬betonen. Proceedings of the 16th ibausil, 20.-23.09.2006, Weimar

Lohaus, L.; Anders, S.; Wefer, M.: Ermüdungsverhalten und Schädigungsentwicklung von Ultrahochfestem Beton (UHPC). Proceedings of the 16th ibausil, 20.-23.09.2006, Weimar

Lohaus, L.; Anders, S.: High-Cycle Fatigue of Ultra-High Performance Concrete – Fatigue Strength and Damage Development. “2nd International FIB Congress”, 04.-08.06.2006, Neapel

Lohaus, L.; Anders, S.: Static and Fatigue Behaviour of High-Performance Concrete in “Grouted Joints” for Hybrid Structures. “2nd International FIB Congress”, 04.-08.06.2006, Neapel

 

 

 

2002 - 2005

Lohaus, L.; Anders, S.: High-Cycle Fatigue of „Ultra-High Performance Concrete“ and „Grouted Joints“ for Offshore Wind Energy Turbines. EUROMECH Colloquium 464b - Wind Energy, 4.-7.10.2005, Oldenburg

Anders, S.: High-cycle Fatigue of „Ultra-high Performance Concrete“ in „Grouted Joints“ for Offshore Wind Energy Turbines. “PhD Symposium on Wind Energy in Europe” of the European Academy of Wind Energy (EAWE), University of Athens, 22./23.09.2005, Athen

Anders, S.: Duktilität von Hochleistungsbetonen für dynamisch beanspruchte Verbindungen. Doktorandentreffen der deutschen Sektion der „European Academy of Wind Energy“, 15./16.03.2005, Kassel

Anders, S.: Duktilität von Hochleistungsbetonen für dynamisch beanspruchte Verbindungen. 44. Forschungskolloquium des DAfStb, Universität Hannover, 7./8. Oktober 2004

Lohaus, L.; Anders, S.: Effects of polymer- and fibre modifications on the ductility, fracture properties and micro-crack development of ultra-high performance concrete. In Proceedings “International Symposium on Ultra-High Performance Concrete”, S. 625-636, 13.-15.09.2004, Kassel

Lohaus, L.; Anders, S.: Effects of polymer modification on the mechanical and fracture properties of high and ultra-high strength concrete. In Proceedings “11th International Congress on Polymers in Concrete (ICPIC 2004)”, S. 183-190, 02.-04.06.2004, Berlin

Lohaus, L., Anders, S.: Sichtbetontechnologie – Rezeptur, Prüfung, Möglichkeiten der Nachbearbeitung. Tagungsband zum 13. Kasseler Baubetriebsseminar Schalungstechnik 18./19.09.03, Kassel, 2003

Lohaus, L.; Petersen, L.; Anders, S.: Feuchte in porösen Baustoffen, Experimentelle Bauphysik, Verband der Bausachverständigen Norddeutschlands e.V., Hannover, 05.04.2003

Lohaus, L.; Anders, S.: Robuster Sichtbeton – Betontechnologische Forschung. Weiterentwicklung und Prüfung von Sichtbeton. In: Sichtbeton – (K)eine Diskrepanz zwischen Wunsch und Realität, 1. Grazer Baubetriebs- und Bauwirtschaftsymposium, 28.03.2003, Verlag der Technischen Universität Graz, Graz, 2003

Lohaus, L.; Anders S.: Betontechnik und Lebensdauer. Wirtschaftsvereinigung der Bauindustrie NRW, Düsseldorf, Dezember 2002

Lohaus, L.; Anders, S.: Forschungsbedarf bei Sichtbeton. In Sichtbeton 2, DBV Heft Nr. 5, Vorträge zur DBV-Arbeitstagung, Duisburg, März 2002

Weitere Infos über #UniWuppertal: