2021 - 2023
Feldrappe, V.; Ehrenberg, A.; Iravani, A.; Anders, S.: Influence of air cooled and granulated blast-furnace slag on the thermal resistance of cyclic high-temperature concrete, Proceedings in civil engineering, Ernst & Sohn GmbH, pp. 281-287, ibausil, Weimar, 13.-15.09.2023
Anders, S.; Otto, J.; Gurski, J.: Separability of cement stone and aggregates in concrete recycling, Proceedings in civil engineering, Ernst & Sohn GmbH, ibausil, Weimar, 13.-15.09.2023
Pise, M.; Brands, D.; Schröder; J.; Gebuhr, G.; Anders, S.: Virtual experiments for steel fiber-reinforced high performance concrete based on unit cell calculations - Numerical calibration of phenomenological material model, The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.092375, September 2023
Mueller, N.; Goldack, A.; Anders, S.: Fracture properties in compression - determination of a "Compressive fracture energy" using digital image correlation technique; The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.092322, September 2023
Gebuhr, G.; Anders, S.; Pise, M.; Brands, D.; Schröder, J.: Approach for detection of fatigue phases using the example of high-performance concrete, The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.092394, September 2023
Mena Alonso, A.; Gebuhr, G.; Vicente, M. A.; Anders, S.; Minguez, J.; Gonzalez, D. C.: Macro and meso structural parameters for estimating fatigue life in high-performance fiber-reinforced concrete in bending, The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.092377, September 2023
Pise, M.; Schröder, J.; Brands, D.; Gebuhr, G.; Anders, S.: Phase-field model for degradation of steel fiber-reinforced ultra-high performance concrete during low cycle fatigue, The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.09383, September 2023
Weber, F.; Anders, S.: Fatigue damage versus creep deformation - differentiation using the development of stiffness, The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.092386, September 2023
Gebuhr, G.; Mena Alonso, A.; Pise, M.; Anders, S.; Vicente, M.A.; Brands, D.; Schröder, J.: Predictive power of crack opening rate for flexural fatigue life of steel fiber-reinforced high and ultra-high performance concrete, The Eleventh International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS - 11, Bangalore, India, doi.org/10.21012/FC11.092370, September 2023
Pise, M.; Gebuhr, G.; Brands, D.; Schröder, J.; Anders, S.: Phase-field modeling for failure behavior of reinforced ultra-high performance concrete at low cycle fatigue, Proceedings in Applied Mathematics and Mechanics, doi: 10.1002/pamm.202300233, August 2023
Porsch, M.; Anders, S.; Gurski, J.: Nachweis von Kopfbolzendübeln zur Übertragung von Horizontalkräften aus Brückenlagern in Lagersockel, Berichte des Deutschen Zentrums für Schienenverkehrsforschung (DZFS), Bericht 39 (2023), Juni 2023
Mena Alonso, A.; Gonzalez D.C.; Gebuhr, G.; Anders, S.; Vicente, M. A.: Influence of the randomness of fiber distrubution on the dispersion of fatigue response in steel fiber reinforced concrete using mictro-computed tomography, 15th International Conference on Fracture (ICF15), Atlanta, GA USA, 11-16 Juni 2023
Pise, M.; Brands, D.; Schröder, J.; Gebuhr, G.; Anders, S.: Phenomenological material model for damage in steel-fiber reinforced high performance concrete during low cylce fatigue, Proceedings in Applied Mathematics and Mechanics, doi.org/10.1002/pamm.202200236, März 2023
Hoffman, C.; Geissler, A.; Anders, S.: In-situ U-Wert-Messung - Teil 2: Vergleich von Messgeräten und Anwendung vor Ort, Bauphysik, Ernst & Sohn, doi.org/10.1002/bapi.202200037, Februar 2023
Anders, S.; Iravani, A.; Hoffmann, C.; Geissler, A.; Voss, K.: In-situ U-Wert-Messung - Teil 1: Vergleich von Verfahren und Einflüsse in Heizkammerversuchen, Bauphysik, Ernst&Sohn, doi.org/10.1002/bapi.202200041, Februar 2023
Gebuhr, G.; Pise, M.; Anders, S.; Brands, D.; Schröder, S.: Damage development of steel fibre reinforced high performance concrete in high cycle fatigue tests, Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022) Cape Town, South Africa, DOI: 10.1201/9781003348450-216, 5-7 September 2022
Pise, M.; Brands, D.; Schröder, J.; Gebuhr, G.; Anders, S.: Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete, Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022) Cape Town, South Africa, - Zingoni (ed.), doi: 10.1201/9781003348443-212, 5-7 September 2022
Schröder, J.; Pise, M.; Brands, D.; Gebuhr, G.; Anders, S.: Phase-field modeling for damage in high performance concrete at low cycle fatigue, Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of The Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022) Cape Town, South Africa, Zingoni (ed.), doi.org/10.1201/978100334844 , 5-7 September 2022
Schröder, J.; Pise, M.; Brands, D.; Gebuhr, G.; Anders, S.: Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: Numerical calibration and experimental validation, Computer Methods in Applied Mechanics and Engineering (doi.org/10.1016/j.cma.2022.115181), August 2022
Markert, M.; Gebuhr, G.: Influence of Concrete Moisture on the Pull-Out Resistance of Steel Fibres, Proceedings of the 5th International Conference Bond in Concrete 2022, DOI: dx.doi.org/10.18419/opus-12271, Stuttgart, Germany, 25.-27. Juli 2022
Gurski, J. F.; Anders, S.; Zwolinski, S.: Properties of recycled aggregates for precast industry produced in different crushers. Proceedings of the “fib Congress 2022”, Oslo, 12.-16.06.2022
Gebuhr, G.; Pise, M.; Anders, S.; Brands, D.; Schröder, J.;: Damage Evolution of Steel Fibre-Reinforced High-Performance Concrete in Low-Cycle Flexural Fatigue: Numerical Modeling and Experimental Validation, Materials 2022, 15(3) (doi.org/10.3390/ma/15031179), Februar 2022
Kern, B.; Oneschko, N.; Podhajecky, A.-L.; Lohaus, L.; Anders, S.; Haist, M.: Comparative analysis of concrete behaviour under compressive creep and cyclic loading; International Journal of Fatigue (doi.org/10.1016/j.ijfatigue.2021.106409), Dezember 2021
Pise, M.; Brands, D.; Schröder, J.; Gebuhr, G.; Anders, S.: Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations, Proceedings in Applied Mathematics and Mechanics (DOI:10.1002/pamm.202100180), Juni 2021
Iravani, A.; Feldrappe, V.; Ehrenberg, A.; Anders, S.: Stability of Concrete containing Blast-Furnace Slag exposed to cyclic elevated temperature, Symposium fib ICCS20-21, Prag, 2021
Ehrenberg, A.; Feldrappe, V.; Iravani, A.; Anders; S.: Verwendung von Eisenhüttenschlacken zur Steigerung des Hochtemperaturwiderstands zementgebundener Bauprodukte, Schlussbericht zu IGF-Vorhaben Nr. 20318 N, 2021
Feldrappe, V.; Ehrenberg, A.; Iravani, A.; Anders, S.: Der Einfluss von Hüttensand und Hochofenstückschlacke auf die Temperaturbeständigkeit von Beton unter zyklischer Hochtemperaturbeanspruchung, Vortrag/Poster, ibausil-Tagung, Bauhaus-Universität Weimar, 2021
Weber, F.; Anders, S.: Vergleich von 3-Punkt und 4-Punkt Biegezugversuchen zur Bestimmung der Nachrissbiegezugfestigkeit, Beton- und Stahlbetonbau 116, Sonderheft Stahlbetonbau, p. 48-58, Ernst&Sohn Verlag, Berlin (DOI: 10.1002/best.202100013), 2021
Weber, F.; Orben, J.; Haus, A., Anders, S.: Betontechnologische Einflüsse auf die Leistungsklassen von Stahlfaserbeton, Beton- und Stahlbetonbau 116 (2021), Sonderheft Stahlbetonbau, p. 36-47, Ernst&Sohn Verlag, Berlin (DOI: 10.1002/best.202100011), 2021
2016 - 2020
Pise, M.; Brands, D.; Schröder, J.; Gebuhr, G.; Anders, S.: On the application of representative volume elements for steel fiber reinforced high performance concrete - a numerical study, Proceedings in Applied Mathematics and Mechanics (DOI: 10.1002/pamm.202000323), Juli 2020
Breitenbücher, R.; Anders, S., von Daake, H.; Wiens, U.: 2. Überarbeitung der Vergussbeton-Richtlinie des DAfStb, p. 2-3, beton [12/2020], Verlag Bau+Technik, Erkrath, 2020
Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Elasto-plastic phase-field model for pullout tests of steel fiber embeddeding high-performance concrete: numerical calibration and experimental validation, Proceedings in Applied Mathematics and Mechanics. Vol. 19(1), DOI:10.1002/pamm.201900255, 2019
Oneschkow, N.; Anders, S.; Dehn, F.;: New findings in the research of concrete fatigue, Structural Concrete, Journal of the fib, doi.org/10.1002/suco.20190701, September 2019
Gudžulić, V.; Neu, E.; Gebuhr, G.; Anders, S.; Meschke, G.: Numerisches Mehrebenen-Modell für Stahlfaserbeton: Von der Faser- zur Strukturebene - Mehrstufige Validierung anhand einer experimentellen Studie an hochfestem Faserbeton, Beton- und Stahlbetonbau, VOl. 115(2), DOI: 10.1002/best.201900067, 2019
Gebuhr, G.; Pise, M.; Sarhil, M.; Anders, S.; Brands, D.; Schröder, J.: Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models, Structural Concrete, Volume 20(4), pp. 1254-1264, DOI: 10.1002/suco.201900034, 2019
Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete, Proceedings of the Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC), pp. 1391-1396, DOI: 10.1201/9780429426506-240, 2019
Gebuhr, G.; Pise, M.; Sarhil, M.; Anders, S.; Brands, D.; Schröder, J.: Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue, Proceedings of the Seventh International Conference on Structural Engineering, Mechanics and Computation (SEMC), DOI:10.1201/9780429426506-249, 2019
Gebuhr, G.; Pise, M.; Sarhil, M.; Anders, S.; Brands, D.; Schröder, J.: Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling, Derkowski, W. et al. (Ed.): Proceedings of the fib Symposium 2019, pp. 889-896 (full paper digital), 27.-29.05.2019 in Kraków (Polen), 2019
Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Phase-field modeling of steel fiber reinforced high-performance concrete considering failure, VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Braunschweig, 2019
Pise, M.; Brands, D.; Gebuhr, G.; Sarhil, M.; Schröder, J.; Anders, S.: Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation, Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Wien, (DOI: 10.1002/pamm.201900255), 2019
Pouran, O.; Anders, S.; Harte, R.; Montag, U.: Influence of Variation in Strength of Concrete on the Bending Response of a Cut-and-cover-Tunnel Structure Considering Results of Small-scale Tests at Elevated Temperatures, Application of Structural Fire Engineering (ASFE’19), June 13-14, Singapore, 2019
Kesting, H.; Helmus, M.; Anders, S.: Building Information Modeling (BIM) zur Optimierung von Stoffkreisläufen im Bauwesen. Artikel im „Recycling Atlas“ Edition Detail, München 2018
Pise, M.; Brands, D.; Gebuhr, G.; Schröder, J.; Anders, S.: Analysis of pullout behavior of steel fibres embedded in high-performance Concrete using phase-field modeling. International Association of Applied Mathematics and Mechanics, Munich 19.-23. March 2018
Anders, S.: Testing for model-specific deterioration indicators – Versuche für modelspezifische Schädigungsindikatoren. 2. Kolloquium – GRK 2075 „Modelle für die Beschreibung der Zustandsänderung bei Alterung von Baustoffen und Tragwerken“. Eingeladener Vortrag, Braunschweig, 05./06.Oktober 2017
Iravani, A.; Anders, S.: Explosive spalling of UHPC - Evaluating spalling risk by mass loss measurement at high temperatures. Proceedings of the 5th International Workshop on Concrete Spalling (IWCS), 12./13. October 2017, Borås, Sweden
Iravani, A.; Anders, S.: Effect of cement type, aggregate type and concrete age on the mass loss of concrete exposed to elevated temperature. Proceedings of the 5th International Workshop on Concrete Spalling (IWCS), 12./13. October 2017, Borås, Sweden
Kesting, H.; Anders, S.; Helmus, M.; Meins-Becker, A.: Building Information Modeling (BIM) als Basis für den Umgang mit digitalen Informationen zur Optimierung von Stoffkreisläufen im Bauwesen. 58. Forschungskolloquium des DAfStb, 20./21.09.2017, Kaiserlautern
Anders, S.; Schovenberg, M.: Performance of Steel Fibre Reinforced Concrete – Comparability of Tests according to DAfStb-Guideline “Stahlfaserbeton” and DIN EN 14651. Acta Polytechnica CTU Proceedings, p. 68-70; Prague 2017
Anders, S.; Iravani, A.: Explosive Spalling of UHPC – Evaluating Spalling Risk by mass loss measurements at high temperatures. Vortrag im Rahmen des “Sino-German Science Workshop on UHPC” and “1st International Conference on UHPC Materials an Structures”, 27.-30.10.16 Changsha, China
Iravani, A.; Anders, S.: Time dependent Mass Loss of UHPC after single and cyclic thermal Exposure. Proceedings of HiPerMat 2016, 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, March 9-11, 2016, Kassel
Iravani, A.; Anders, S.: Thermal Exposure of UHPC – Time dependent Mass Loss of UHPC after Single and Cyclic Thermal Exposure. 4th International Symposium on Ultra-High Performance Concrete Nanotechnology for High Performance Construction Materials”, Kassel 2016
2011 - 2015
Anders, S.: Residual Strength of Steel-Fiber reinforced Concrete after High-Temperature Exposure. Proceedings of the 4th International Workshop on Concrete Spalling due to Fire Exposure (IWCS), 08./09. October 2015, Leipzig
Iravani, A.; Saravanja, M.; Anders, S.: Mass Loss and Porosity Development of various Concrete Mixtures at High-Temperatures. Proceedings of the 4th International Workshop on Concrete Spalling due to Fire Exposure (IWCS), 08./09. October 2015, Leipzig
Anders, S.: Comparison of Residual Strengths of Concretes with quarzitic, limestone and slag sand constituents after cyclic high-temperature exposure. Beitrag zur ICCRRR – International Conference on Concrete Repair, Rehabilitation and Retrofitting, Leipzig, 05-07 October 2015
Anders, S.: Feuchtemessung im Bauwesen. Vortrag im Rahmen des b.v.s Seminars Messtechnik für Bauingenieure organisiert an der BUW.
Saravanja, M.; Anders, S.: Effects of Superabsorbent Polymers on the Behaviour of UHPC subjected to High Temperatures. In Proceedings of the International RILEM Conference on “Application of Superabsorbent Polymers and other New Admixtures in Concrete Construction”, 14th – 17th September 2014, Dresden, RILEM Publications S.a.r.l., pages 257-264, Bagneux, 2014
Anders, S.: Concrete at High Temperature – Tests for Validating Numerical Models. Proceedings of the XIVth Bilateral Czech/German Symposium, 4th to 7th June 2014, Wuppertal
Núñez Aldave, J. K.; Anders, S.: Fatigue Behaviour of High-Performance Concrete – Comparison of Damage Indicators for Numerical Modelling. Proceedings of the XIVth Bilateral Czech/German Symposium, 4th to 7th June 2014, Wuppertal
Anders, S.: Hochfeste Betone unter Ermüdungsbeanspruchung – Einfluss der Temperaturentwicklung bei hohen Lastfrequenzen. Beitrag zur Festschrift zum 60. Geburtstag von Prof. Ludger Lohaus, Hannover, 2014
Anders, S.: Gestalten mit Beton – Beispiele und Möglichkeiten. Vortrag für Künstler aus dem Bergischen Land organisiert an der BUW.
Núñez Aldave, J. K.; Anders, S.: Ermüdungsverhalten von Hochleistungsbeton – Vergleich von Schädigungsindikatoren. Beiträge zur 1. Jahrestagung des Deutschen Ausschuss für Stahlbeton mit 54. Forschungskolloquium. 07./08. November 2013, Ruhr-Universität Bochum
Lohaus, L.; Petersen, L.; Griese, R.; Anders, S.: Spezialbetone im Kraftwerksbau, Zeitschrift BauPortal, Heft 3, März 2012
Anders, S.: Design of Grouted Connections for Offshore Wind Energy Converters and Composite Structures using UHPC. In Proceedings of the “3rd International Symposium on Ultra-High Performance Concrete Nanotechnology for High Performance Construction Materials”, 07.-09.03.2012, Kassel
Saravanja, M.; Anders, S.; Klingsch, W.: Wirkung unterschiedlicher Fasern und Fasergehalte auf das Verhalten ultrahochfester Betone bei hohen Temperaturen. Festschrift zum 60. Geburtstag von Prof. Budelmann, 2012
Anders, S.: Hochleistungs-Vergusssysteme für Windkraftanlagen. Dyckerhoff-Baustofftechniktag Nordwest, Münster, 03.11.2011
Saravanja, M.; Klingsch, W.; Anders, S.: Effects of different Fibre Materials and Quantities on High Temperature Strength and Explosive Spalling of UHPC. Proceedings of the 2nd International RILEM Workshop on Concrete Spalling due to Fire Exposure, 05-07.10.2011, Delft
Anders, S.: Rohr-in-Rohr-Verbindungen – Modell zur Abschätzung der Beanspruchungen. Festschrift zum 60. Geburtstag von Gerhard Hanswille, Schriftenreihe des Institutes für Konstruktiven Ingenieurbau, Heft 20, 2011
Anders, S.: Erneuerbare Energien – Herausforderungen für die Baustofftechnik. In „Fortschritte in der Baustofftechnik“, Berichte aus dem Institut für Baustoffe, LUH, Hannover, 2011
Lohaus, L.; Petersen, L.; Anders, S.; Griese, R.: Beton im Kraftwerksbau. In: BetonKalender 2011, S. 433-517, Ernst&Sohn Verlag, Berlin, 2011
2006 - 2010
Anders, S.; Erhardt, T.: Offshore Windenergie – Neue Chancen für die Bautechnik in Beton. In: beton, S. 488-495, Verlag Bau-Technik, Erkrath, 12/2010
Anders, S.; Erhardt, T.: Offshore Windenergie – Neue Chancen für die Bautechnik in Beton. Fachtagung des Verbandes deutscher Betoningenieure, Dresden 2010
Anders, S.; Lohaus, L.; Lindschulte, N.: Opportunities and Risks of Steel Fibres in Grouted Joints. European Wind Energy Conference EWEC 2010, 20.-23. April 2010, Warsaw
Lindschulte, N.; Anders, S.: Grouted Joints – Trag- und Verformungsverhalten. Offshore-Windenergie-Kolloquium 2009, Hannover, 2009
Anders, S.; Lohaus, L.: Optimized High-Performance Concrete in Grouted Connections. In: Proceedings of the International fib Symposium 2008 – Tailor Made Concrete Structures – New Solutions for our Society, 19.-22.05.2008, Amsterdam
Anders, S.; Lohaus, L.: Ultra-High Performance Concrete in Grouted Connections - Potential and Design Aspects. In: Proceedings of the 2nd International Symposium on Ultra-High Performance Concrete, 05.-07.03.2008, Kassel
Anders, S.: Betontechnologische Einflüsse auf das Tragverhalten von Grouted Joints. Dissertation, Leibniz Universität Hannover, Institut für Baustoffe, 2008
Lohaus, L.; Anders, S.: Hybride Bauweisen mit Hochleistungsbeton – Neue Chancen aus der Forschung an Grouted Joints. 52. Ulmer Betontage, 12.-14.02.2008, Neu-Ulm
Lohaus, L.; Anders, S.; Wefer, M.: High-Cycle Fatigue of Ultra-High Performance Concrete (UHPC) - Fatigue Strength and Damage Development. In: Proceeding of the 3rd Int. Conference on Lifetime Oriented Design Concepts, 12.-14.11.2007, Bochum
Lohaus, L.; Anders, S.: Static and Fatigue Behaviour of Grouted Connections for Hybrid Structures. 2nd Symposium on Connections between Steel and Concrete, 4.-7.09.2007, Stuttgart
Lohaus, L.; Ramge, P.; Höveling, H.; Anders, S.: Superplasticizer-Based Approach for Optimized Paste-Composition and Robustness of SCC. Proceedings of the 5th International Symposium SCC2007, 03.-05.September 2007, Gent
Lohaus, L.; Anders, S.: Ductility and Fatigue Behaviour of Polymer-Modified and Fibre-Reinforced High-Performance Concrete. “Advances in Concrete Materials-Symposium 2007, 23./24.07.2007, Stuttgart
Anders, S.; Lohaus, L.: Polymer- und fasermodifizierte Hochleistungsbetone für hochdynamisch beanspruchte Verbindungen wie „Grouted Joints“ bei Windenergieanlagen. Schlussbericht zum Forschungsstipendium T 4/2002, Stiftung Industrieforschung Köln, April 2007, Hannover
Anders, S.; Lohaus, L.: Untersuchungen zum Ermüdungsverhalten axial beanspruchter Grouted Joints. Gigawind-Symposium 2007, 18.04.2007, Hannover
Anders, S.: Untersuchungen zum Ermüdungsverhalten axial beanspruchter Grouted Joints. Doktorandentreffen der deutschen Sektion der „European Academy of Wind Energy“, 22./23.03.2007, Hannover
Lohaus, L.; Anders, S.: Chancen kunststoffmodifizierter und faserverstärkter Hochleistungsbetone in neuen Bauweisen. Festschrift „Baustoffe für zukünftige Bauaufgaben“ Schriftenreihe des Instituts für Baustoffe, TU Dresden, 2006
Höveling, H.; Lohaus, L.; Anders, S.: Der Fließmittelbasierte Ansatz zur Optimierung von Hoch¬leistungs¬betonen. Proceedings of the 16th ibausil, 20.-23.09.2006, Weimar
Lohaus, L.; Anders, S.; Wefer, M.: Ermüdungsverhalten und Schädigungsentwicklung von Ultrahochfestem Beton (UHPC). Proceedings of the 16th ibausil, 20.-23.09.2006, Weimar
Lohaus, L.; Anders, S.: High-Cycle Fatigue of Ultra-High Performance Concrete – Fatigue Strength and Damage Development. “2nd International FIB Congress”, 04.-08.06.2006, Neapel
Lohaus, L.; Anders, S.: Static and Fatigue Behaviour of High-Performance Concrete in “Grouted Joints” for Hybrid Structures. “2nd International FIB Congress”, 04.-08.06.2006, Neapel
2002 - 2005
Lohaus, L.; Anders, S.: High-Cycle Fatigue of „Ultra-High Performance Concrete“ and „Grouted Joints“ for Offshore Wind Energy Turbines. EUROMECH Colloquium 464b - Wind Energy, 4.-7.10.2005, Oldenburg
Anders, S.: High-cycle Fatigue of „Ultra-high Performance Concrete“ in „Grouted Joints“ for Offshore Wind Energy Turbines. “PhD Symposium on Wind Energy in Europe” of the European Academy of Wind Energy (EAWE), University of Athens, 22./23.09.2005, Athen
Anders, S.: Duktilität von Hochleistungsbetonen für dynamisch beanspruchte Verbindungen. Doktorandentreffen der deutschen Sektion der „European Academy of Wind Energy“, 15./16.03.2005, Kassel
Anders, S.: Duktilität von Hochleistungsbetonen für dynamisch beanspruchte Verbindungen. 44. Forschungskolloquium des DAfStb, Universität Hannover, 7./8. Oktober 2004
Lohaus, L.; Anders, S.: Effects of polymer- and fibre modifications on the ductility, fracture properties and micro-crack development of ultra-high performance concrete. In Proceedings “International Symposium on Ultra-High Performance Concrete”, S. 625-636, 13.-15.09.2004, Kassel
Lohaus, L.; Anders, S.: Effects of polymer modification on the mechanical and fracture properties of high and ultra-high strength concrete. In Proceedings “11th International Congress on Polymers in Concrete (ICPIC 2004)”, S. 183-190, 02.-04.06.2004, Berlin
Lohaus, L., Anders, S.: Sichtbetontechnologie – Rezeptur, Prüfung, Möglichkeiten der Nachbearbeitung. Tagungsband zum 13. Kasseler Baubetriebsseminar Schalungstechnik 18./19.09.03, Kassel, 2003
Lohaus, L.; Petersen, L.; Anders, S.: Feuchte in porösen Baustoffen, Experimentelle Bauphysik, Verband der Bausachverständigen Norddeutschlands e.V., Hannover, 05.04.2003
Lohaus, L.; Anders, S.: Robuster Sichtbeton – Betontechnologische Forschung. Weiterentwicklung und Prüfung von Sichtbeton. In: Sichtbeton – (K)eine Diskrepanz zwischen Wunsch und Realität, 1. Grazer Baubetriebs- und Bauwirtschaftsymposium, 28.03.2003, Verlag der Technischen Universität Graz, Graz, 2003
Lohaus, L.; Anders S.: Betontechnik und Lebensdauer. Wirtschaftsvereinigung der Bauindustrie NRW, Düsseldorf, Dezember 2002
Lohaus, L.; Anders, S.: Forschungsbedarf bei Sichtbeton. In Sichtbeton 2, DBV Heft Nr. 5, Vorträge zur DBV-Arbeitstagung, Duisburg, März 2002
